Pipes & tubes

Buttweld Fittings



Other kinds of forgings products


Nickel Alloy  N02200

Chemical Compostion:

material Ni Cr Iron Mn Al  Cu Si     max S    max
Nickel N02200 99.0min 0.40max 0.35 0.150 0.25 0.35 0.010


Mechanical Properties:

Tensile Strength,Min PSI (MPa) Yield Strength (0.2% offset) Min(Mpa) Elongation in 2 in. or 50mm or 4D,Min.,%
55000 (379) 15000 (103) 40



Material Seamless Tubing &/or Pipe Buttweld fitting Plate/Sheet/Strip Bar Forging and Forging stock
N02200 SB-161 SB-366 SB-162 SB-160, SB-564


Nickel 200 is 99% min pure nickel alloy, one of the toughest metals. The Nickel 200’s characteristic including excellent mechanical properties, a low gas content, low Vapor-pressure, low magnetic properties, high thermal and electrical conductivity. These properties Nickel 200 fabricatable and highly resistant to corrosive environment.

Nickel 200 is usually useful in any environment below 600 degrees Fahrenheit. It is highly resistant to corrosion by neutral and alkaline salt solutions. Nikel 200 also has low corrosion rates in neutral and distilled water.  The metal can be hot formed to any shape and formed cold by all methods.